Safety Grating Ladder Rungs – Non-Slip Passage for Climbing Up or Down

Optional Materials

• Where to use? Outdoor or indoor?
• Work environment? What are the risk factors for falls?
• Slip resistance level requirement.
• Corrosion protection level requirements.
• Need to be easy to install, operate and maintenance.
• Material strength.

• Pre-galvanized carbon steel

  Galvanizing process can effectively prevent steel corrosion and rust, so as to prolong the service life of steel. (ASTM A-924-G90)

• HRPO carbon steel

  Hot Rolled Pickled and Oiled (HRPO) steel is produced to protect the steel from rust and corrosion. This type of material is good for fabricating, welding, bending and cold forming. Finished products have a clean and flat surface that can be used in a variety of applications. (ASTM A-1011 HRPO)

• Aluminum

  We adopt 5052-H32 aluminum as material. Its main alloying element is magnesium, which has excellent formability, corrosion resistance, weldability and medium strength. The load capacity of 5052-H32 aluminum can be up to 0.5 lbs./ft.

• Stainless steel

  Stainless steel has good corrosion resistance, heat resistance, low temperature strength and mechanical properties. It also has good hot workability such as stamping and bending.

Choose A Style

• 

  Standard grip-strut ladder rungs

• 

  Reserved grip-strut ladder rungs

• 

  Traction tread ladder rungs

• The above mentioned are the most commonly used styles.
• Various patterns are available for different anti-skid requirements.
• Ladder rungs lengths can vary depending on the material gauge and hole rows.
• Except for ladder rungs, we also offer plank gratings, stair treads and scaffolds.
• Welcome to our pattern chamber to select more creative designs.

Design Rules

• Grip Strut Ladder Rungs
  • Type: standard & reverse diamond (vertical opening & parallel opening to the length).
  • Width
    • Standard diamond: 2-1/2".
    • Reverse diamond: 1-5/8".
  • Height
    • Standard diamond: 1-1/8".
    • Reverse diamond: 1-5/8".
  • Lengths:
    • Standard diamond: 3', 4', 10', 12'.
    • Reverse diamond: 23-1/8".
• Traction-Tread Ladder Rungs
  • Hole type: 2-hole, 3-hole and 4-hole.
  • Width: 1-1/4", 1-5/8" and 2-1/4".
  • Depth: 1-1/2", 1-1/8" and 1-1/2".
  • Length: 48", 60" or cut length.